Results returned:

kdb327:
Support for BlueStorm and Blue Heat/PCI Drivers Under Windows Embedded 7 SP1

kdb326:
Overwrite all saved settings on the Blue Heat/Net and Blue Heat/Net Sync

kdb325:
Installing Embedded Windows Embedded Standard 7 on the QCG Xtreme/CPU

kdb324:
Installing Embedded Windows Embedded CE on the QCG Xtreme/CPU

kdb323:
Installing Embedded Windows XP Embedded on the QCG Xtreme/CPU

kdb322:
Installing Embedded Windows Operating Systems on the Xtreme/CPU Single Board Computer

kdb321:
Clock Tree Settings in the Blue Heat/Net Sync Web Configuration Manager

kdb319:
Configuring a PCI/104 or PC/104-Plus card for an Embedded Stack

kdb318:
How to use a BlueHeat/Net on a Mac

kdb317:
SICK Laser Measurement System (LMS) Serial Compatibility

kdb316:
PCI/104-Express to PCI Express Adapter (ADG017 and ADG021) Compatibility

kdb314:
QNX 6 BlueHeat/Net Host Driver ARP Interaction

kdb313:
BlueStorm Windows driver errata for part numbers BL[G]048, BL[G]049, BL[G]050, BL[G]051

kdb312:
TCP & UDP Ports Used by the BlueHeat/Net (Setting Up Firewall Access)

kdb311:
How to Setup Two BlueHeat/Net’s to Act as a Serial Cable Replacement or Extension

kdb310:
Radio Modem General Setup Tips

kdb309:
Setting a Custom Baud Rate in Linux (2.6.x Kernel)

kdb308:
Differences in Bluestorm & Xtreme/104-Plus Product Family

kdb307:
Compiling a Linux Kernel with Support for CTI Products

kdb306:
Viewing Hidden Devices In Windows Device Manager

kdb305:
PC/104 Problems with CPU Boards

kdb304:
Update Blue Heat/Net Firmware Using a Local File

kdb303:
Shell Scripts not working with Ubuntu Linux

kdb302:
BlueStorm/Express - Windows CE 5.0 Known Issues

kdb300:
Using 2 Blue Heat/Nets as PPP routers to make a PPP link

kdb298:
Using the Blue Heat/Net to convert line interfaces

kdb297:
Accessing ComSync/104 Registers

kdb296:
Xtreme/104 Baud Rates by Model

kdb295:
Suggested BlueHeat/Net Setup Procedures

kdb294:
Windows Applications using BlueHeat/Net can cause errors

kdb293:
Cannot install BlueHeat/Net when launching Configuration Manager from setup

kdb292:
Echo Card Locks PC when Status Port is Enabled

kdb291:
Reliability Prediction (MTBF) Values for all Connect Tech Inc. Products

kdb290:
PCI-X Bus Technology - Will Connect Tech PCI boards work in my PCI-X system?

kdb289:
QNX 6.2 Evaluation Version does not contain shared object libraries required by the Blue Hea

kdb286:
Using The Xtreme/104 Opto Rev. C or Rev. D In RS-485 Half Duplex Mode

kdb285:
Using The Status Register With Xtreme/104 and DFlex

kdb284a:
Using The Xtreme/104 Opto In RS485 Half Duplex Mode

kdb284:
Using The Xtreme/104 Opto Rev. B In RS-485 Half Duplex Mode

kdb282:
white dwarf linux and Xtreme/DFlex installation

kdb281:
RTLinux installation notes

kdb280:
COM Port Number Mapping in Windows 2000

kdb279:
VB Port Test - VB Sample App

kdb277:
BlueHeat RS485 Available Baudrates

kdb275:
BlueHeat-8 RS485 DB25 Pinouts

kdb274:
DFlex Installation under Win2000

kdb271:
Making Sense of Linux Release Numbers and Kernel Revisions

kdb269:
Intellicon Serial Adapter chmon & chmon32 Documentation

kdb268:
Installing DFlex serial ports under QNX Neutrino

kdb267:
WhiteHEAT USB COM port Naming Conflicts

kdb262:
WhiteHEAT/USB 4 Serial Port LED Behaviour

kdb260:
NT960 causes respawning on Linux

kdb247:
Serial Mice Will Not work with the WhiteHEAT USB

kdb244:
Installing the DFlex Serial Adapter under Solaris 2.6

kdb242:
Implementing Traceinfo.cti to Diagnose CTI Intelligent Serial Adapters

kdb241:
WhiteHEAT USB COM port naming problems

kdb240:
WhiteHEAT USB changing COM port mapping under Win98

kdb238:
SCO UNIX 5.0.5 - Why Does my Intellicon or NT960 driver not start?

kdb233:
Echo off for Win NT RAS Dial-in

kdb232:
Advanced Features of NT960 Universal Firmware

kdb229:
How to toggle RTS and DTR lines through Win32 Visual C++ function calls under Windows NT and

kdb228:
Windows 95 Blue Heat/PCI, Dflex driver looking for WEBDLT.EXE file

kdb227:
How to Access Serial Ports Greater Than COM9 Using C/C++

kdb225:
Baud Rate Support under Windows NT RAS

kdb224:
QNX2 Warm Boot Fix

kdb218:
Multi-Port Serial: Dflex and Blue Heat/PCI changing COM port mapping under Win 95/98

kdb215:
COM Port Number Mapping in Windows95

kdb214:
Asus Motherboard Compatibility with CTI Multiport Serial Adapters

kdb213:
Maximum Number of Blue Heat/PCI Multi Port Serial Adapters in A System

kdb211:
Obtaining a hard copy of system information under Win95

kdb208:
Intellicon Intelligent Multi-Port Serial I/O SCO UNIX 5.0.4 DRIVER Version 2.15C

kdb206:
Intellicon-4 Multi-port Serial I/O Rev. B vs. Rev. D changes

kdb204:
NT960 Buffer/Memory Allocation

kdb201:
Dflex and DFlex-4/104 Multi-Port Serial I/O Solaris 2.4 for x86 Installation Guide.

kdb199:
Win95 PCI Unknown Device Errors

kdb198:
NT960 Flex-16 RS-485 dipswitch settings to mimic Intellicon Flex-8 RS-485 slim.

kdb197:
Wrap Plug Pinouts

kdb196:
NT960 DB-9 Pinouts

kdb194:
Partial List of Dip Switch Settings for the NT960

kdb193:
Typical Port Address Usage

kdb192:
Base Addresses for Some Typical Devices

kdb191:
Typical IRQ Assignments

kdb189:
Partial List of Dip Switch Settings for the Intellicon

kdb188:
RS-485/422 Cable Wiring

kdb187:
Intellicon-8 I/O BOX DB-25 DCE Pinouts

kdb186:
Intellicon-8 DB-25 Pinouts

kdb185:
Intellicon-6+2 Male DB-9 Pinouts

kdb184:
Intellicon-6+2 DB-25 Pinouts

kdb183:
Intellicon-4 DB-9 Pinouts

kdb182:
Intellicon-4 DB-25 Pinouts

kdb181:
Intellicon-2 DB-9 Pinouts

kdb180:
Flex8 I/O Box DB-9 Pinouts

kdb179:
Flex8 DB-9 Pinouts

kdb178:
DFlex-8 I/O Box DB-9 Pinouts

kdb177:
Dflex-2/-4/-8 DB-9 Pinouts

kdb175:
ACM/16 Address Switch Block Settings

kdb172:
How to moniter SIGHUP in QNX 4.xx

kdb171:
Intellicon-2 ISA two Port Serial I/O 32k option.

kdb170:
Uninstalling The Enhanced Dflex Driver/Blue Heat PCI Driver for Windows 95/98

kdb169:
Uninstalling Win 3.1x Intellicon driver from a system.

kdb168:
QNX4 NT960 tracelogger codes for a NT960 Restart Complete (%d/%d)

kdb167:
DFlex/Fast Serial I/O Baud Rate Selection

kdb166:
Dflex Serial I/O Linux Redhat Kernel 1.2.13 Installation

kdb165:
Intellicon Serial I/O Windows NT 3.51/4.0 compatible software list.

kdb164:
NT960 ISA Serial I/O QNX2.xx recommended driver arguments.

kdb162:
Intellicon Serial I/O Qnx4.22 Jerky Mouse Operation.

kdb161:
NT960 Deluxe Host Serial I/O changes, NTLOAD Failures.

kdb160:
DFLEX Serial I/O under MULTIUSER DOS 7 GOLD Installation

kdb158:
HP Pentium BIOS bug - Upper memory conflict

kdb154:
Beyond the 128 device limit under QNX4.2x

kdb151:
Example of how to retrieve status of the CTS modem signal in QNX4

kdb147:
Gateway 2000 PC's -- Beware of CMOS setup wording!

kdb145:
DFlex-4/104 PC-104 Serial I/O QNX2.xx Installation

kdb138:
KDB-138: Dflex(2,4,8) Serial I/O UART Chip to Port # mapping.

kdb132:
Dflex ISA Serial I/O WindowsNT v3.51/4.00 Installation.

kdb131:
Printing problems under UNIX with Intelligent Serial I/O cards

kdb130:
Basic modem AT command settings

kdb129:
Blue Heat RS232 available baud rates.

kdb128:
Intellicon-8 Multiport Serial I/O Rev E and F changes

kdb127:
Intellicon-Flex8 Multiport Serial I/O Rev (A->C) changes

kdb126:
ISA Intellicon/NT960 Serial I/O problems under MSDOS with emm386.exe

kdb125:
Dflex ISA Multiport Serial I/O Windows95 Installation

kdb124:
Dflex ISA Multiport Serial I/O SCO Unix Installation

kdb123:
Dflex2/4Rev. B and Dflex8 Rev. D Multiport Serial I/O changes.

kdb122:
Intellicon Multiport Serial I/O SCO OpenServer V Installation

kdb119:
Intellicon & NT960 ISA Serial I/O and tcflush() under QNX 4.xx

kdb116:
Printing problems under UNIX with Intelligent cards

kdb105:
Ground loops can cause System Damage

kdb103:
Using the QNX4 qnx_ioctl() to raise and lower RTS and DTR.

kdb095:
Intellicon and NT960 Memory and conflicts.

kdb070:
Changes from Rev C to Rev E Intellicon-8

kdb069:
Dflex-2 ISA Serial I/O Lynx Installation

kdb066:
QNx4.22 Modem and tinit examples.

kdb064:
NT960 ISA Serial I/O Line Editing under QNX2.xx

kdb060:
Using TCDRAIN and CTI_TCDRAIN under QNX 4

kdb058:
QNX 4.xx Hardware Interrupt Priority

kdb048:
KDB-048 Intellicon (Z80) Multi-port Serial I/O, Bit Field Definitions for chmon

kdb047:
Dflex Enabling UART Interrupts to ISA Bus

kdb045:
Serial cards and flow control with modems.

kdb041:
Serial ports hanging during QNX4 shutdown

kdb039:
What is the 16550 and how can it benefit communications?

kdb037:
Software Examples for 5 Bit, 1.5 Stop Bits Under DOS

kdb032:
Dflex Boards Under SCO Unix

kdb018:
Multiple Intellicons under QNX4.2x

kdb017:
Dev(32).cti usemsg Under QNX4.2x

kdb013:
Efficient use of Intellicon buffers under DOS

kdb010:
The "Cannot verify code into coprocessor" error message

	Support Center

		Search Knowledge Database

		RMA Request Form

		Product Registration Form

		Download Zone

		Beta Testing

		Warranty Policy

Welcome to Connect Tech Inc.

Ask us about our ROHS
Compliant Products