This convenient adapter board allows users to install either a PCIe/104 or a PCI/104-Express card into a standard PCI Express system slot.
The adapter features both a PCIe/104 and a PCI-104
connector. The passive PCI-104 connector has all
critical PCI input signals tied off to safe levels to avoid
damaging a dual-bus card, while at the same time provides
extra mechanical stability for PCI/104-Express cards.
Specifications
PCIe/104
and PCI/104-Express compatible
Industrial temperature range of -40º C to 85º C
PCIe/104 156 pin stack-through connector
PCI-104
120 pin stack-through connector
x1 lane PCI
Express card edge allows installation in any slot width
Complies
with PCI Express 1.1 electromechanical requirements
Measures
4.050” wide by 4.375” tall
RoHS
compliant
Standard Usage
This adapter supports any x1 lane PCI/104-Express or
PCIe/104 add-in card. Simply mount the add-in card to
the adapter and install the adapter in a PCI Express slot.
Most PCI/104-Express and PCIe/104 cards will require the
connection of an IDE power cable to the P3 connector on the
card. This cable provides the 5V rail to the add-in
card.
Once everything is connected, you may begin using the add-in
card just as you would any other PCI Express add-in card.
No additional configuration is required.
Interested in Connect Tech's PCI Express to PCIe/104 Adapter?
You may also be interested in the following Connect Tech products:
Part #: ADG021
PCIe/104 to PCI
Express Adapter - Bottom Stacking Model
This convenient adapter board allows users to install a
standard PCI Express card into a PCIe/104 or PCI/104-Express single board
computer system in a stack down configuration.
Part #: ADG017
PCIe/104 to PCI
Express Adapter - Top Stacking Model
This convenient adapter board allows users to install a
standard PCI Express card into a PCIe/104 or PCI/104-Express single board computer system
in a stack up configuration.
