Knowledge Database Contents

KDB-010 The "Cannot verify code into coprocessor" error message
KDB-013 Efficient use of Intellicon buffers under DOS
KDB-017 Dev(32).cti usemsg Under QNX4.2x
KDB-018 Multiple Intellicons under QNX4.2x
KDB-032 DFlex Boards Under SCO Unix
KDB-037 Software Examples for 5 Bit, 1.5 Stop Bits Under DOS
KDB-039 What is the 16550 and how can it benefit communications?
KDB-041 Serial ports hanging during QNX4 shutdown
KDB-045 Serial cards and flow control with modems.
KDB-047 DFlex Enabling UART Interrupts to ISA Bus
KDB-048 Intellicon (Z80) Multi-port Serial I/O, Bit Field Definitions for chmon
KDB-058 QNX 4.xx Hardware Interrupt Priority
KDB-060 Using TCDRAIN and CTI_TCDRAIN under QNX 4
KDB-064 NT960 ISA Serial I/O Line Editing under QNX2.xx
KDB-066 QNx4.22 Modem and tinit examples.
KDB-069 DFlex-2 ISA Serial I/O Lynx Installation
KDB-070 Changes from Rev C to Rev E Intellicon-8
KDB-095 Intellicon and NT960 Memory and conflicts.
KDB-103 Using the QNX4 qnx_ioctl() to raise and lower RTS and DTR.
KDB-105 Ground loops can cause System Damage
KDB-116 Printing problems under UNIX with Intelligent cards
KDB-119 Intellicon & NT960 ISA Serial I/O and tcflush() under QNX 4.xx
KDB-122 Intellicon Multiport Serial I/O SCO OpenServer V Installation
KDB-123 DFlex2/4Rev. B and Dflex8 Rev. D Multiport Serial I/O changes.
KDB-124 DFlex ISA Multiport Serial I/O SCO Unix Installation
KDB-125 DFlex ISA Multiport Serial I/O Windows95 Installation
KDB-126 ISA Intellicon/NT960 Serial I/O problems under MSDOS with emm386.exe
KDB-127 Intellicon-Flex8 Multiport Serial I/O Rev (A->C) changes
KDB-128 Intellicon-8 Multiport Serial I/O Rev E and F changes
KDB-129 Blue Heat RS232 available baud rates.
KDB-131 Printing problems under UNIX with Intelligent Serial I/O cards
KDB-132 DFlex ISA Serial I/O Windows NT v3.51/4.00 Installation.
KDB-138 KDB-138: Dflex(2,4,8) Serial I/O UART Chip to Port # mapping.
KDB-145 DFlex-4/104 PC-104 Serial I/O QNX2.xx Installation
KDB-147 Gateway 2000 PC's -- Beware of CMOS setup wording!
KDB-151 Example of how to retrieve status of the CTS modem signal in QNX4
KDB-154 Beyond the 128 device limit under QNX4.2x
KDB-158 HP Pentium BIOS bug - Upper memory conflict
KDB-160 DFlex Serial I/O under MULTIUSER DOS 7 GOLD Installation
KDB-161 NT960 Deluxe Host Serial I/O changes, NTLOAD Failures.
KDB-162 Intellicon Serial I/O Qnx4.22 Jerky Mouse Operation.
KDB-164 NT960 ISA Serial I/O QNX2.xx recommended driver arguments.
KDB-165 Intellicon Serial I/O Windows NT 3.51/4.0 compatible software list.
KDB-166 DFlex Serial I/O Linux RedHat Kernel 1.2.13 Installation
KDB-167 DFlex/Fast Serial I/O Baud Rate Selection
KDB-168 QNX4 NT960 tracelogger codes for a NT960 Restart Complete
KDB-169 Uninstalling Win 3.1x Intellicon driver from a system.
KDB-170 Uninstalling The Enhanced DFlex/Blue Heat PCI Driver for Win 95/98
KDB-171 Intellicon-2 ISA two Port Serial I/O 32k option.
KDB-172 How to monitor SIGHUP in QNX 4.xx
KDB-175 ACM/16 Address Switch Block Settings
KDB-177 DFlex-2/4/8 DB-9 Pinouts
KDB-178 DFlex-8 I/O Box DB-9 Pinouts
KDB-179 Flex8 DB-9 Pinouts
KDB-180 Flex8 I/O Box DB-9 Pinouts
KDB-181 Intellicon-2 DB-9 Pinouts
KDB-182 Intellicon-4 DB-25 Pinouts
KDB-183 Intellicon-4 DB-9 Pinouts
KDB-184 Intellicon-6+2 DB-25 Pinouts
KDB-185 Intellicon-6+2 Male DB-9 Pinouts
KDB-186 Intellicon-8 DB-25 Pinouts
KDB-187 Intellicon-8 I/O BOX DB-25 DCE Pinouts
KDB-188 RS-422/485 Cable Wiring
KDB-189 Partial List of Dip Switch Settings for the Intellicon
KDB-191 Typical IRQ Assignments
KDB-192 Base Addresses for Some Typical Devices
KDB-193 Typical Port Address Usage
KDB-194 Partial List of Dip Switch Settings for the NT960
KDB-196 NT960 DB-9 Pinouts
KDB-197 Wrap Plug Pinouts
KDB-198 NT960 Flex-16 RS-485 dipswitch settings to mimic Intellicon Flex-8 RS-485 slim.
KDB-199 Win95 PCI Unknown Device Errors
KDB-201 DFlex and DFlex-4/104 Multi-Port Serial I/O Solaris 2.4 for x86 Installation Guide.
KDB-204 NT960 Buffer/Memory Allocation
KDB-206 Intellicon-4 Multi-port Serial I/O Rev. B vs. Rev. D changes
KDB-208 Intellicon Intelligent Multi-Port Serial I/O SCO UNIX 5.0.4 DRIVER Version 2.15C
KDB-211 Obtaining a hard copy of system information under Win95
KDB-213 Maximum Number of Blue Heat/PCI Multi Port Serial Adapters in A System
KDB-214 Asus Motherboard Compatibility with CTI Multiport Serial Adapters
KDB-215 COM Port Number Mapping in Windows95
KDB-218 Multi-Port Serial: DFlex and Blue Heat/PCI changing COM port mapping under Win 95/98
KDB-224 QNX2 Warm Boot Fix
KDB-225 Baud Rate Support under Windows NT RAS
KDB-227 How to Access Serial Ports Greater Than COM9 Using C/C++
KDB-228 Windows 95 Blue Heat/PCI, DFlex driver looking for WEBDLT.EXE file.
KDB-229 How to toggle RTS and DTR lines through Win32 Visual C++ function calls under Windows NT and 9x
KDB-232 Advanced Features of NT960 Universal Firmware
KDB-233 Echo off for Win NT RAS Dial-in
KDB-238 SCO UNIX 5.0.5 - Why Does my Intellicon or NT960 driver not start?
KDB-240 WhiteHEAT USB changing COM port mapping under Win98
KDB-241 WhiteHEAT USB COM port naming problems
KDB-242 Implementing Traceinfo.cti to Diagnose CTI Intelligent Serial Adapters
KDB-244 Installing the DFlex Serial Adapter under Solaris 2.6
KDB-247 Serial Mice Will Not work with the WhiteHEAT USB
KDB-260 NT960 causes respawning on Linux
KDB-262 WhiteHEAT/USB 4 Serial Port LED Behaviour
KDB-267 WhiteHEAT USB COM port Naming Conflicts
KDB-268 Installing DFlex serial ports under QNX Neutrino
KDB-269 Intellicon Serial Adapter chmon & chmon32 Documentation
KDB-271 Making Sense of Linux Release Numbers and Kernel Revisions
KDB-274 DFlex Installation under Windows 2000
KDB-275 Blue Heat-8 RS-485 DB-25 Pinouts
KDB-277 Blue Heat RS-485 Available Baudrates
KDB-279 VB Port Test - VB Sample App
KDB-280 COM Port Number Mapping in Windows 2000
KDB-281 RTLinux installation notes
KDB-282 DFlex UART IRQs cannot be used when loopback mode is turned on.
KDB-283 white dwarf linux and Xtreme/DFlex installation
KDB-284 Using The Xtreme/104 Opto Rev. B In RS-485 Half Duplex Mode
KDB-285 Using The Status Register With Xtreme/104 and DFlex
KDB-286 Using The Xtreme/104 Opto Rev. C or Rev. D In RS-485 Half Duplex Mode
KDB-289 QNX 6.2 Evaluation Version does not contain shared object libraries required by the Blue Heat/PCI wrapper program.
KDB-290 PCI-X Bus Technology - Will Connect Tech PCI boards work in my
PCI-X system?
KDB-291 Reliability Prediction (MTBF) Values for all Connect Tech Inc. Products
KDB-292 Echo Card Locks PC when Status Port is Enabled
KDB-293 Cannot install Blue Heat/Net unit when launching Configuration Manager from setup.
KDB-294 Windows applications using BlueHeat/Net sometimes fails Win32 serial communication API
KDB-295 Suggested Method to Setup a BlueHeat/Net Installation
KDB-296 Xtreme/104 Baud Rates by Model
KDB-297 Accessing ComSync/104 Registers
KDB-298 Using a BlueHeat/Net as an RS232/RS485 Converter
KDB-300 Using 2 Blue Heat/Nets as PPP routers to make a PPP link